A new workstation runs... solaris express b25

Got a new machine: AMD X2 Dual Core 4800+, 250GB SATA2 disk, 2GB RAM
for aprox 2000e from MikroMafia. It is fast. Very fast. Worked fine with
Solaris Express build 25 from www.opensolaris.org/os/downloads

Some details below:

Mobo: ASUS A8N-SLI Premium S939 NF4 SLI 2*GLAN
CPU: AMD ATHLON 64 X2 4800+ S939 (2 x 1024 KB L2)
Memory: 2048 MB 4KPL 512Mb Kingston PC-3200 DDRAM
HDD: 250 GB SATA2 16MB Cache
Video: GEFORCE 6600 256MB VGA+DVI+TV-OUT

Disk:
SATA2 250GB Maxtor 16MB cache: works fine using nvidia controller.
This mobo has two SATA controllers. I haven't tried using Sillicon Image,
the 2nd controller.

genunix: [ID 640982 kern.info] IDE device at targ 0, lun 0 lastlun 0x0
genunix: [ID 846691 kern.info] model Maxtor 6L250S0
genunix: [ID 479077 kern.info] ATA/ATAPI-7 supported, majver 0xfe minver 0x1e
pci: [ID 370704 kern.info] PCI-device: ide@0, ata2
genunix: [ID 936769 kern.info] ata2 is /pci@0,0/pci-ide@8/ide@0
genunix: [ID 773945 kern.info] UltraDMA mode 6 selected
gda: [ID 243001 kern.info] Disk0:
ata: [ID 496167 kern.info] cmdk0 at ata2 target 0 lun 0
genunix: [ID 936769 kern.info] cmdk0 is /pci@0,0/pci-ide@8/ide@0/cmdk@0,0
unix: [ID 190185 kern.info] SMBIOS v2.3 loaded (2226 bytes)

Video:
I have a Geforce 6600, works fine with Xorg. I will try soon to install nvidia drivers
to gain some performance. Maybe I should try bzflag then :)

Network:
I have two Gig NICs. Im using the nvidia one fine without any
problems. However the second one, which is a Marvell 88E81001 should
have drivers for Solaris. I haven't got time for that yet.

lo0: flags=2001000849 mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
nge0: flags=1000843 mtu 1500 index 2
inet 192.168.1.5 netmask ffffff00 broadcast 192.168.1.255

gld: [ID 944156 kern.info] nge0: nge V1.1: type "ether" mac address 00:13:d4:53:db:f9
pci: [ID 370704 kern.info] PCI-device: pci1043,8141@a, nge0
genunix: [ID 936769 kern.info] nge0 is /pci@0,0/pci1043,8141@a
nge: [ID 801725 kern.info] NOTICE: nge0: link 100Mbps Full-Duplex up
pcplusmp: [ID 637496 kern.info] pcplusmp: pci10de,57 (nge) instance 0 vector 0x15 ioapic 0x2 intin 0x15 is bound to cpu 1

AMD X2 CPU:

0 on-line since 11/09/2005 18:51:15
1 on-line since 11/09/2005 18:51:17

Status of virtual processor 0 as of: 11/09/2005 19:49:54
on-line since 11/09/2005 18:51:15.
The i386 processor operates at 2412 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 1 as of: 11/09/2005 19:49:54
on-line since 11/09/2005 18:51:17.
The i386 processor operates at 2412 MHz,
and has an i387 compatible floating point processor.


The system is fast, very fast. JDS seems flying. Looking forward to get build27 soon.